J. D. NEUHAUS Profi 025Ti, Руководство по эксплуатации

Страница: 204 / 218

AC C E S S O R I E S
With the use of a filter silencer, oil aerosols can be
avoided and noise insulation improved:
왘
99.9 % of oil aerosols during oil lubrication of the
motor are absorbed by the filter element.
왘
The noise insulation reduces noise levels by 3 to
4 dB (A) compared with the standard silencer
(sinter plate).
The ambient temperature must not be lower than - 10° C.
M A I N T E N A N C E O F F I LT E R S I L E N C E R
The filtered oil runs into the transparent collecting
container
3. This container must be emptied before
the fluid level reaches the filter element.
왘
Turn the drain valve 4 90° and allow the fluid
to drain out.
왘
Close the drain valve.
The filter must be replaced after approx. 2500 hours
of operation.
왘
Turn the collecting container 3 slightly and detach.
왘
Unscrew the filter element 2 .
왘
Insert a new filter element, with sealing ring 1 and
push on collecting container until it engages.
In the event of a control hose length exceeding 10 m,
the reaction times of the pushbutton controls increase
significantly.
Consequently, a booster unit is generally installed on
the motor for controls E, F and FI, enabling normal
reaction times.
The operating temperature range is from 0° C to 80° C.
Filter silencer
B O O S T E R U N I T
F I LT E R S I L E N C E R
powered by air !
AC C E S S O R I E S
Page 62
1
2
3
4