J. D. NEUHAUS Profi 025Ti, Руководство по эксплуатации

Страница: 92 / 218

Control valve (on motor)
Note: In order to connect the hoses to the control
valve, we recommend removal of the hose adapter.
Remove the hose adapter (secured via central bolt).
Attach the hoses to the corresponding nipples (see
designation in illustration)
Secure the hoses using the one-ear hose clamps and
crimping tool.
Secure the strain-relief cable.
AT T E N T I O N !
The strain-relief rope must be installed with
the correct length in order to prevent loading
of the hoses.
Pull the bellows over the hose adapter. The upper
collar of the bellows fits into the recess of the hose
adapter.
In order to secure the hose adapter to the control
valve, a long A/F 6 socket spanner must be guided
between the three hoses, through the middle of
the bellows and inserted into the hexagon socket
of the bolt.
C O N N E C T I N G F - C O N T R O L S
Pull the bellows over the hose bundle for F-control.
For F-control for lifting and lowering only, remove
approx. 80 mm of hose bundle protective sheathing;
for F-controls with additional functions (trolley/crane
movement) remove approx. 160 mm from end of
protective sheathing.
Pull the strain-relief cables through the eye bolt and
secure using cable clamps.
Insert the control hoses: See illustration above
Compressed air with hose designation 1 or colour: white
Direction of movement “lift”
with hose designation 2 or colour: green
Direction of movement “lower”
with hose designation 3 or colour: red
Bellows with A /F 6 socket spanner
Hose adapter with nipples designation lift, lower
powered by air !
I N I T I A L O P E R AT I O N
Page 24
Dowel pin
Lift
Compressed-air
connection
Lower