J. D. NEUHAUS Profi 025Ti, Руководство по эксплуатации

Страница: 130 / 218

With the use of a filter silencer, oil aerosols can be
avoided and noise insulation improved:
99.9 % of oil aerosols during oil lubrication of the
motor are absorbed by the filter element.
The noise insulation reduces noise levels by 3 to 4 dB
(A) compared with the standard silencer (sinter
plate).
The ambient temperature must not be lower
than -10° C.
M A I N T E N A N C E O F F I LT E R S I L E N C E R
The filtered oil runs into the transparent collecting
container
3. This container must be emptied before the
fluid level reaches the filter element.
Turn the drain valve 4 90° and allow the fluid to
drain out.
Close the drain valve.
The filter must be replaced after approx. 2500 hours of
operation.
Turn the collecting container 3 slightly and detach.
Unscrew the filter element 2 .
Insert a new filter element, with sealing ring 1 and
push on collecting container until it engages.
In the event of a control hose length exceeding 10 m,
the reaction times of the pushbutton controls increase
significantly.
Consequently, a booster unit is generally installed on
the motor for controls E, F and FI, enabling normal
reaction times.
The operating temperature range is from 0° C to 80° C.
Filter silencer
B O O S T E R U N I T
F I LT E R S I L E N C E R
powered by air !
AC C E S S O R I E S
AC C E S S O R I E S
Page 62
1
2
3
4