J. D. NEUHAUS Profi 025Ti, Руководство по эксплуатации

Страница: 177 / 218

In Germany, the trade association regulations ”Operation
of load carrying devices used with lifting equipment”
(BGR 258) must be adhered to. In other countries, the
relevant local regulations must be observed.
왘
Attaching aids must be attached at the lowest point
of the hook. Never load the point of the hook.
왘
Ensure that the hook safety catch is closed.
AT T E N T I O N !
JDN Air Hoists must be capable of alignment
under load. Otherwise impermissible addi-
tional forces can occur, which can damage
the hoist components.
왘
First, lift the load hook, in order to pull the slack
chain tight. With the chain tight, briefly interrupt
the lifting procedure. The hoist can align itself and
the material is protected.
왘
Then lift the load.
The overload protection system aborts the lifting
operation in the event of loads whose weight is more
than the pre-defined limit value for the overload
protection (see
Overload protection section, page 59).
DA N G E R !
Ensure that there are no persons below
the load.
왘
Then lower the load and ground it carefully.
DA N G E R !
For all air hoist applications, ensure that
the load hook can be lowered all the way
to the ground, in order to prevent a load
being moved to the lower limit position
without reaching the ground. Danger due
to overloading.
왘
Lower the load hook far enough, so that the load
can be easily detached.
왘
Move the load hook out of the lifting area in order
to avoid hazardous situations.
If you wish to interrupt working with your JDN Air
Hoist:
왘
Set down and detach the load.
왘
Move the load hook out of the lifting area
in order to avoid hazardous situations.
I N T E R R U P T I N G WO R K I N G
D E TAC H I N G T H E L OA D
L OW E R I N G T H E L OA D
L I F T I N G T H E L OA D
Attach the load safely
powered by air !
OP E R AT I O N
Page 35