J. D. NEUHAUS Profi 025Ti, Руководство по эксплуатации

Страница: 22 / 218

C O N N E C T I N G T H E RO P E CO N T RO L S
Knot both control ropes at the ends of the
control lever.
Knot the green pin into the rope which activates
“lift” mode, with the pointed end upwards
(see also illustration
Rope control, page 22).
Knot the yellow pin into the rope which activates
“lower” mode, with the pointed end downwards.
Knot the handle into the rope so that the arrow mark-
ings correspond to the actual direction of movement.
C O N N E C T I N G T H E E - CO N T RO L S
Pushbutton valve (hand control)
Guide the strain-relief cable through the eye on the
pushbutton valve and secure using the cable clamp.
Push the one-ear clamps onto the hose ends.
Attach the hoses to the hose nipples.
The one-ear hose clamp must lie in the middle of the
hose nipple clamping range. The best clamping char-
acteristics are achieved in this range.
Pushbutton valve with nipples and rope
with designation lift and lower
Rope control, motor side
C O N N E C T I N G T H E CO N T RO L S
powered by air !
SETTING UP
Page 22