J. D. NEUHAUS Profi 025Ti, Руководство по эксплуатации

Страница: 192 / 218

R E M OV I N G A N D I N S TAL L I N G L OA D S L E E VE
A N D B U F F E R
- S I N G L E C H A I N H O I S T ( 3 T I )
Removal
왘
Drive out the roll pin 1 for securing the chain from
the load sleeve 3 .
왘
Remove the chain link 2 from the chain pocket.
왘
Detach the buffer 4 and buffer discs 5 from the chain.
Assembly
왘
Push the buffer discs (edge encloses buffer) and the
buffer onto the chain.
왘
Insert the end chain link into the chain pocket of the
load sleeve (position of the weld must align with that
of the following links).
왘
Drive in a new roll pin to secure the chain link in the
load sleeve.
L OA D S L E E VE I N S P E C I AL D E S I G N
W I T H C L A M P I N G P I E C E
Removal
왘
Loosen screw 7 and take it out of the chain pocket
together with locking washer 6 and clamping piece 1
왘
Remove the chain link 2 from the chain pocket.
왘
Detach the buffer 4 and buffer discs 5 from the chain.
Assembly
왘
Push the buffer discs (edge encloses buffer)
and the buffer onto the chain.
왘
Insert the end chain link into the chain pocket
of the load sleeve (position of the weld must align
with that of the following links).
왘
Insert the clamping piece 1 into the chain pocket,
tighten screw 7 with locking washer 6 (41 Nm).
REMOVING AND INSTALLING LOAD SLEEVE,
BOTTOM BLOCK, CLAMP AND BUFFER
powered by air !
M A I N T E N A N C E
Page 50
3
5
4
2
5
1
3
5
4
2
5
1
6
7