J. D. NEUHAUS Profi 025Ti, Руководство по эксплуатации

Страница: 103 / 218

Within the EU, these controls are equipped with an
EMERGENCY STOP device (optional outside the EU).
In order to avert danger produced by the lifting
movement as quickly as possible, release the
pushbuttons - the movement of the load is then
interrupted immediately.
Only press the red EMERGENCY STOP button firmly if
this Stop function fails. The EMERGENCY STOP button
engages. This results in the closing of a separate check
valve and the load hook comes to rest instantaneously.
The pushbuttons for lifting and lowering now no longer
function.
The EMERGENCY STOP button can be released again by
turning clockwise. It jumps back into place.
DA N G E R !
Never release the EMERGENCY STOP button
before the danger has been eliminated and
the stop function via the pushbuttons has
been restored.
RO P E CO N T RO L
With rope control, the lifting and lowering movements
are controlled directly. Both rope ends are connected to
one another via a handle, enabling precise one-hand
operation. The direction of movement is marked by
arrows on the handle.
The control elements for rope control and the energy-
switching component of the control valve on the motor
(reversing valve) are positively connected to one
another. This connection is designed in such a way
that, in an emergency, the control valve can be reset to
a stable neutral position. Thus, no additional
EMERGENCY STOP device is required.
Lift: Carefully pull on the green rope with the green
handle pin. The load is lifted slowly.
Pull harder on the rope, in order to increase the
lifting speed.
Release the rope slightly in order to reduce the
lowering speed.
Lowering: Carefully pull on the red rope with the
yellow handle pin. The load is lowered slowly.
Pull harder on the rope, in order to increase the
lowering speed.
Release the rope slightly, in order to reduce the
lowering speed.
Rope control
E M E RG E N C Y S T O P D E V I C E
powered by air !
O P E R AT I O N
Page 35