background image

OPERATING, MAINTENANCE  

& PARTS MANUAL

HAND-OPERATED LEVER HOIST

LSB-C Series

LEVER CHAIN HOIST

Before installing hoist, fill in the information below.

Rated Load                                                                                          

Serial No.                                                                                         

Purchase Date                                                                                 

Rated Loads: 

3/4, 1, 1-1/2, 3 and 6 Tons

(750, 1000, 1500, 3000 and 6000 kg) 

Follow all instructions and warnings for inspecting, maintaining and operating this hoist. 

 

The use of any hoist presents some risk of personal injury or property damage. That risk is greatly increased if proper instructions and 

warnings are not followed. Before using this hoist, each operator should become thoroughly familiar with all warnings, 

instructions and 

recommendations in this manual. Retain this manual for future reference and use.

 Forward this manual to operator.  

Failure to operate equipment as directed in manual may cause injury.

P/N: 192090087 REV. AA 

October 2021

Содержание Coffing Hoists LSB-12000C



















Отзывы: