13
P/N: 192090087 REV. AA
October 2021
TROUBLESHOOTING
Symptom
Possible Cause(s)
Corrective Action
Slip caused by ineffective braking.
1. Worn-out friction discs.
2. Excessive oil on the braking surface.
3. Incorrect assembly of the brake system.
1.
Replace with new fictions discs.
2. Disassemble and clean.
3. Assemble correctly. (See the following pages)
Load dropped while lowering.
1. Damaged friction discs.
2. Foreign matter in the braking system.
1. Replace with new ones.
2. Disassemble and clean.
Jammed operating handle.
Over-tightening of the brake.
Operate the lever hoist as if lowering a load.
Noises during hoisting and lowering operation.
Wear or deformation of the load chain and load
sheave.
Replace with new parts.
Operating handle becomes difficult to operate
during lifting or lowering operation.
1. Over-hoisting or over-lowering.
2. Twist in the load chain causing it to catch
between load sheave and load chain guide.
1. Operate the hoist in the opposite direction.
2. Operate the hoist in the opposite direction and
remove the twist from the load chain.
NOTE: Refer to pages 15-17 for parts lists.