Isel IMD1, Руководство пользователя

Страница: 67 / 117

Positioning module UVE8112, IMD10 DcSetup
programme
Firmware update
T e e e ed
be loaded easily from the outside into the module, without memory modules having to be replaced.
The loading of a new software version can only be realised via the serial interface.
A rt from e pro amm the c nfigura le se ash memory. The
memory sector is composed of fo r segm nts, store the current
parameters. segment-wise deletion leads to the
newly written during the normal update, i.e. the ameters
are added due to the update, these are configured with default values.
Contrary to the normal update, the update via
memory and the stored parameter settings are d the programme also
works, if no executable software exists in t mo
It is recommendable in any case to safe the set a DCF file before carrying out an
update.
T rogram e wh ch is be loa d into he m
This file must be selected via a corresponding d
process.
he software of th driv modul is stor in a rewritable Flash memory. Thus, the programme can
pa th gr e, o b t of parameters is also in the Fl
u e the fourth segment being used to
A fact that only the first three memory banks are
set of parameters is maintained. If new par
the bootstrap loader deletes the complete Flash
lost. This possibility to loa
he dule, e.g. after a failed normal update.
of parameters as
he p m i to de t odule is read in from a hex file (e.g. DCCON.HEX).
ialogue box. Afterwards you can launch the update
67