Isel IMD1, Руководство пользователя

Страница: 40 / 117

DcSetup programme
Positioning module UVE8112, IMD10
CAN settings
With the Connection / CAN Settings command, you open a dialogue box with which you can set the
CAN node number, the baud rate, the Can connection and the DII functions library for the CAN
connection to the drive module. Furthermore, the current status of the CAN driver is indicated here. It
has to be taken into account that the Dll functions library
CanApi.Dll and the communications
programme CanKernel.Exe as well as the monitoring programme CanWatch.Exe must be in the
same directory.
If the CAN driver has already been launched from a different application, the DCSetup programme
can normally no longer use the Can bus in order to communicate with the UVE8112 / IMD10 module.
Only the serial interface is concerned. If you nevertheless want to use DCSetup with the CAN bus,
you have to activate the “Declaration mode”. In this case, you can observe the different parameters
via the “Settings\Object Directory” menu. The writing of the parameters, however, is not possible. The
use of the DCSetup programme in the “Step-by-step commissioning” mode or in the “Random order”
mode frequently generates error messages during the active declaration mode, which you can,
however, just ignore. The reason for the generation of error messages are the unsuccessful attempts
of DCSetup to overwrite different parameters for the purposes of the first initialisation. You should
also take into account that the CAN driver has to be activated, before the declaration mode can be
used.
The currently set node address and the status of the CAN driver are also indicated in the status bar.
40