INIM GameOver SmartLiving 1050, Инструкция по установке и программированию

Страница: 80 / 100

80 Errors and faults
Installation and Programming Manual
7-4
Ring Sensitivity
The various configurations of modern telephone lines and the multiplicity of
signals that transit along them, require major attention in the design of phone-
line interfaces. The optimized phone-line interface on-board SmartLiving control
panels has been especially designed to satisfy present day requirements. In
addition to the traditional telephone plug for land line (PSTN) connections, there
are usually boards for ISDN or ADSL connections.
If there are ADSL filters on the line, it will be necessary to connect the control
panel downstream of the filters, to the line dedicated to telephone equipment
(this line is clearly indicated on the filters).
Following are two “trouble” conditions which may be caused by ISDN or ADSL
connections, etc. , and the “actions” you must take if you encounter such
problems.
•
Problem - The control panel is enabled for “Answerphone” and “Teleservice”
functions but fails to pick up incoming calls after the programmed number of
rings or picks up after more rings than programmed.
Answer - Increase the
value of the “Ring Sensitivity” parameter to a suitable level.
• Problem - The control panel is enabled for “Answerphone” and “Teleservice”
functions but picks up during “through” calls (calls that should not involve the
control panel).
Answer - Decrease the value of the “Ring Sensitivity”
parameter to a suitable level.