INIM GameOver SmartLiving 1050, Инструкция по установке и программированию

Страница: 64 / 100

64 Options and programming methods
Installation and Programming Manual
Key parameters
This section allows you to programme all the parameters of the selected digital key.
•
Description - editable field for the name of the digital key user.
• Partitions - the partitions the digital key is assigned to and therefore can
control.
• Options - activated by means of keys and , are:
• Timers - this section allows you to associate a timer with the digital key. The
key will be able to operate the system only when the associated timer is “On”.
• Shortcuts - this section allows you to programme up to 4 shortcuts (F1, F2,
F3, F4) for each key.
The shortcut associated with the key can be one of the following types:
•• None
•• Arm/disarm
•• Stop alarms
•• Clear Call Queue
•• Delete memory
•• Activate Output
•• Deactiv. outputs
•• Overtime
•• Teleservice req.
•• Voice guide
If a digital key is held in the vicinity of an nBy/S or nBy/X reader, the LEDs will
run through a series of visual signals with the following meanings:
Delete key
This section allows you to delete enrolled digital keys from the system
configuration. The enrolled digital keys can be found in the list with the symbol.
1. Use or to select the digital key you wish to delete.
2. Press to delete the selected digital key.
3. Press to confirm and exit.
Enable/disable
This section allows you to enable/disable the digital keys:
1. Use or to select the digital key you wish to enable/disable
2. Use keys or to enable/disable the selected digital key.
3. Press to confirm and exit.
Via PC
Select an item from “SmartLiving System - Users - Digital keys” from the tree
menu on the left, then go to the “Parameters settings” template on the right.
Option If enabled If disabled
Patrol
The digital key will be able to disarm specific
partitions for patrol purposes.
Maintenance
The digital key will be able to block alarm/tamper
outputs for the time that it is held in front of a
reader.
Use keyShortcuts
If a digital key is held in the vicinity of a reader,
only the digital key shortcuts will be indicated,
and not the reader shortcuts.
If a digital key is held in the vicinity of a reader,
only the reader shortcuts will be indicated and, if
configured, the first shortcut programmed on the
digital key.
These options do
not apply to Air2-
KF100 wireless
keyfobs.
DisarmNotAllowed
If a digital key is held in the vicinity of a reader
when partitions are armed, the Disarm option will
be inhibited (all LEDs Off).
If a digital key is held in the vicinity of a reader
when partitions are armed, the Disarm option will
be allowed (all LEDs Off).
LED indicator sequence
Option: Use keyShortcuts
enabled disabled
1 Red LED On Digital key shortcut F1
shortcut associated with the red LED on the
reader
2 Blue LED On Digital key shortcut F2
shortcut associated with the blue LED on the
reader
3 Green LED On Digital key shortcut F3
shortcut associated with the green LED on
the reader
4 Yellow LED On Digital key shortcut F4
shortcut associated with the yellow LED on
the reader
5 All LEDs On This sequence does not occur Digital key shortcut F1
6 All LEDs Off
Option: DisarmNotAllowed
enabled disabled
No request to arm ALL the partitions
common to both the key and reader. Request to arm ALL the partitions common
to both the key and reader.