INIM GameOver SmartLiving 1050, Инструкция по установке и программированию

Страница: 52 / 100

52 Options and programming methods
Installation and Programming Manual
• Partitions : you can associate each telephone number with specific partitions.
By selecting the partitions, using Keys and , you enable/disable the
users (who have at least one of these partitions in common with the telephone
number) to modify the number concerned.
Number of rings
This value determines the number of rings the system allows before picking up an
incoming call.
Max.num.attempts
This value determines the number of calls attempts the system will make before
deleting the contact number from the call queue.
Message repeats
This value determines the number of times the voice message will be played
during the call.
All the above-mentioned values can be programmed as follows:
1. Use keys or to select the field you wish to change, then use the
number keys ( , etc.) to edit the number.
or
Use key or to increase or decrease the number.
2. Press to confirm and exit.
Via PC
Via the SmartLeague software programme, you can enable the “ Enable to
receive SMS text messages ” option which (in addition to the other signals
programmed for when the event occurs) enables the telephone number to
receive an SMS text message from the Nexus GSM dialer.
6-9
Events
This programming section deals with all the event-generated output actions.
The control panel recognizes all of the events described in this paragraph and, for
each them, in accordance with programming, can generate actions both when the
event occurs and when it restores/ends.
The operations that can be carried out at the control panel are: output activation,
event notification via telephone, save to event memory, voice message
management, voice message management and management of all the options
relative to each event. These actions are triggered as soon as the event occurs
(or restores).
Telephone notifications (calls) are queued and sent out in chronological order.
However, some events may need to be notified immediately (for example, use of
a code under duress), therefore, such events can be given priority by selecting
the “Priority” option.
Event notification via e-mail requires the use of a SmartLAN/G board (refer to
paragraph
3-10-4 SmartLAN ).
Event notification via predefined SMS messages requires the use of a Nexus
(refer to paragraph
6-26-4 Text for SMS messages ).
The following table shows the events the control panel recognizes, the number of
events for each type, the trigger and restoral method of each event and the event
category (Pulse).
Table 32:
Telephone - via the SmartLeague software programme
Option Part of the system Template/section
Select number
SmartLiving System - Telephone
Programming
Number of rings
Parameters settings - Telephone
line parameters
Max.num.attempts
Parameters settings - Telephone
dialer parameters
Message repeats