INIM GameOver SmartLiving 1050, Инструкция по установке и программированию

Страница: 76 / 100

76 Options and programming methods
Installation and Programming Manual
• “ EXC ” (or “ ESC ”), to inhibit the control panel zones
• “ INC ”, to activate the control panel zones
For the last two commands, the message text must be:
<xxxxxx> EXC <zone description>
where:
•
<xxxxxx> is the PIN of a control-panel user coded, followed by a blank space
• “EXC” (or “ESC” or “INC”) is the command to be implemented on the zone,
followed by a space
• <zone description> is the name zone to be inhibited or activated
6-26-2
Caller ID commands
The “Programming - Caller ID commands” section will allow you to programme up
to 200 telephone numbers and the commands which will be implemented when
each telephone number is recognized by the control panel. If a voice call is
received from a telephone number, the command you select from those
programmed in the “SMS Commands” section will be carried out.
PANEL OPTIONS
• Telephone number - this is the telephone number of the caller (system
user) who dispatches the command to the Nexus.
• Code - this field associates the user code with the telephone number. The
code determines which partitions the user can operate on.
• Actions - this is the identifier number of the command, selected from the 30
commands programmed in the “Programming - SMS Commands” section.
• Refuse call
•• Enabled - when the telephone number calls, the Nexus will not answer the
call but will carry out the command associated with the telephone number
concerned.
•• Disabled - when the telephone number calls, the SmartLiving will answer
the call and will allow it to proceed in such a way that the SmartLiving
control panel can activate (if so programmed) the dialer after the
programmed number of rings.
• Receive diverted SMS - option which, when activated, enables the selected
number to receive SMS messages from the Nexus dialer which do not comply
with the command-activation format.
Note
A SMS “command” text message cannot be diverted.
6-26-3
General parameters
The “Programming - General parameters” section will allow you to programme
some of functions relating to management of the Nexus device.
•
Credit balance enquiry - this identifies the method used by the Nexus to
make balance enquiries to the GSM provider (regarding its own SIM).
••
Automatic - the Nexus will make balance enquiries to the GSM provider
(regarding its own SIM) without need of programming.
•• Manual - SMS - balance enquiries will be made via an SMS text sent by
the Nexus to the GSM provider.
•• Manual - Call - balance enquiries will be made via a call which will be
diverted by the Nexus to the GSM provider.
•• Manual - Network Command - balance enquiries will be made via a
special command made available by the GSM provider.
•••
Balance enquiry number - this is the telephone number or Network
command (made available by the GSM provider) for balance enquiries.
This field must be programmed regardless of the type of manual mode
selected (SMS, Call or Network command).
••• Balance enquiry message - this is the text message that will be sent
to the previously mentioned number. This field must be programmed
only when Manual - SMS mode is selected.
••• Balance enquiry answer number - this is the telephone number
(made available by the GSM provider) balance information will come
from.This field must be programmed regardless of the selected manual
mode (SMS, call or Network command).
••• Balance enquiry answer message - part of the SMS answer
message used to filter the information. You must type in the text which
precedes the numeric value of the balance. For example, if the
message sent by the GSM provider reads - “Dear customer, your
remaining credit is: €15”, you must type in “your remaining credit is: ”.