ifm
System Manual
ecomat
mobile
PDM360NG (CR1080, CR1081, CR9042) Target V01
2011-07-28
Configurations
Set device parameters (setup)
36
CAN test: data transmission
9625
►
Select the menu item [CAN Transmit Test] in the menu [CAN Test Test Selection].
The menu [CAN Test Transmit Test]
appears.
►
Select the requested group of
numbers with [SELECT].
►
Increment or decrement the value
of the selected group of numbers
with [UP] or [DOWN].
►
Set the test CAN package to be
transmitted in [Tx Bytes].
►
Set the CAN ID of the transmitter
in [CAN TX-ID].
►
Cyclically transmit the set CAN
package with [START].
The number of the CAN packages transmitted since [START] appears in [Tx Frame Counter].
►
Finish the cyclical transmission of the set CAN package with [STOP].
►
Change to the previous menu with [EXIT].
CAN test: receive data
9627
►
Select the menu item [CAN Receive Test] in the menu [CAN Test Test Selection].
The menu [CAN Test Receive Test]
appears.
►
Start to receive CAN packages
with [START].
The received CAN packages appear
one after the other in [Rx Bytes].
The CAN ID related to the CAN
package appears in [CAN RX-ID].
The number of the CAN packages
received since [START] appears in
[Rx Frame Counter].
►
Finish to receive the CAN packages with [STOP].
►
Change to the previous menu with [EXIT].