ifm
System Manual
ecomat
mobile
PDM360NG (CR1080, CR1081, CR9042) Target V01
2011-07-28
Configurations
Set up programming system
70
Demo program
Function
CR2500Demo_CR2033_xx.pro
I/O compact module CR2033 as slave of a Controller (CANopen master),
4 x digital input,
4 x digital input analogue evaluation,
4 x digital output,
CR2500Demo_CR2101_xx.pro
Inclination sensor CR2101 as slave of a Controller (CANopen master).
CR2500Demo_CR2102_xx.pro
Inclination sensor CR2102 as slave of a Controller (CANopen master).
CR2500Demo_CR2511_xx.pro
I/O smart module CR2511 as slave of a Controller (CANopen master),
8 x PWM output current-controlled.
CR2500Demo_CR2512_xx.pro
I/O smart module CR2512 as slave of a Controller (CANopen master),
8 x PWM output.
Display of the current current for each channel pair.
CR2500Demo_CR2513_xx.pro
I/O smart module CR2513 as slave of a Controller (CANopen master),
4 x digital input,
4 x digital output,
4 x analogue input 0...10 V.
CR2500Demo_Interrupt_xx.pro
Example with SET_INTERRUPT_XMS.
CR2500Demo_Operating_hours_xx.pro
Example of an operating hours counter with interface to a PDM.
CR2500Demo_PWM_xx.pro
Converts a potentiometer value on an input into a normed value on an
output with the following POUs:
- INPUT_VOLTAGE,
- NORM,
- PWM100.
CR2500Demo_RS232_xx.pro
Example for the reception of data on the serial interface by means of the
Windows hyper terminal.
StartersetDemo.pro
StartersetDemo2.pro
StartersetDemo2_fertig.pro
Various e-learning exercises with the starter set EC2074.
_xx = indication of the demo version