ifm
System Manual
ecomat
mobile
PDM360NG (CR1080, CR1081, CR9042) Target V01
2011-07-28
Limitations and programming notes
Programming notes for CoDeSys projects
103
6.2.6
Movement of elements
7392
Image and text elements can be moved on the display in a defined manner.
Element movement
Description
Rotate
Rotate the element around a defined pivot point
Indicate the angle of rotation
- angle of rotation in [degree]
- positive value = rotation clockwise
- negative value = rotation anticlockwise
Shift
Shifting of the element:
- horizontal
- vertical
- only within the drawing area
- max. until leaving the drawing area
Relative shifting of
- rectangle
- ellipse / circle
Each edge of the element can be shifted by a specified number of pixels via an
INT type variable:
- basic position of the 4 edges = zero
- new value shifts this edge by the specified value
Shift direction for value > 0:
- horizontal edge down
- vertical edge to the right
Shift direction for value < 0:
- horizontal edge up
- vertical edge to the left
6.2.7
Save
7430
Applies only to the following devices:
- Controller CRnn32
- PDM360: CR1050, CR1051, CR1060
- PDM360compact: CR1052, CR1053, CR1055, CR1056
- PDM360NG: CR108n, CR9042
NOTE
Only files in the flash memory (or EEPROM) are protected against power failure.
Always save the related boot project together with your CoDeSys project in the device.
►
Menu [Online] > [Create boot project] (this must be carried out again after every change!).
> After a reboot, the device starts with the boot project last saved.