ifm
System Manual
ecomat
mobile
PDM360NG (CR1080, CR1081, CR9042) Target V01
2011-07-28
Annex
Overview of the files and libraries used
434
13.5
Overview of the files and libraries used
Installation of the files and libraries ........................................................................................... 434
General overview ...................................................................................................................... 435
What are the individual files and libraries used for? ................................................................. 437
2711
(as on 2011-03-02)
Depending on the unit and the desired function, different libraries and files are used. Some are
automatically loaded, others must be inserted or loaded by the programmer.
13.5.1
Installation of the files and libraries
2721
Factory setting: the device contains only the boot loader.
►
Load the operating system (
*.H86
or
*.RESX
)
►
Create the project (
*.PRO
) in the PC: enter the target (
*.TRG
)
►
Additionally depending on device and target:
Define the PLC configuration (
*.CFG
)
> CoDeSys integrates the files belonging to the target into the project:
*.TRG, *.CFG, *.CHM, *.INI, *.LIB
►
If required, add further libraries to the project (
*.LIB
).
Certain libraries automatically integrate further libraries into the project.
Some FBs in
ifm
libraries (
ifm_*.LIB
) e.g. are based on FBs in CoDeSys libraries (
3S_*.LIB
).