ifm
System Manual
ecomat
mobile
PDM360NG (CR1080, CR1081, CR9042) Target V01
2011-07-28
Configurations
Device update to new software version
91
Preparatory work:
1.
►
Copy the update file:
- to any directory on the PC,
- to the main directory on the USB stick.
2.
►
Disconnect the PDM!
3.
►
Establish an Ethernet network connection between the PDM and PC.
4.
►
Press and hold any 3 keys on the PDM at the same time.
5.
►
Switch the device on again.
To do so, terminal 15 and terminal 30 must be connected to plus.
6.
> Display
ifm
splash screen.
The reboot process starts.
7.
►
Release the PDM keys.
8.
> Display of the
ifm
recovery screen.
> Display of the IP address, subnet mask and gateway address of the device.
> The mode [Device Update] is selected.
►
If another mode is selected, press the right upper key to select [Device Update].
Continue here:
-
Device update via web browser
(
→
-
Device update via USB stick
(
→
)
INFO:
During the update process the device indicates the current status. If the process hangs
unexpectedly, indicate the last status when you contact the service hotline.