ICON500 high performance vector control frequency inverter user
manual
Chapter 5 function code
table
- 60
-
21 Group Keypad and Display Group
P21.00
LCD language option
0: Chinese
1: English
this parameter valid in ICON500
0
☆
P21.02
MKfunction option
0
：
no function;
1
：
Forward Jog
2
：
Reverse Jog; 3
：
Forward/reverse Switch
4
：
Quick stop; 5
：
coast to stop
6
：
Curse left shift(LCD keypad )
1
★
P21.03
STOP function
0:Valid only at Keypad Control
1:valid at all command Channels
1
☆
P21.04
Monitoring display1
00.00
～
99.99
27.00
☆
P21.05
Monitoring display2
00.00
～
99.99
27.01
☆
P21.06
Monitoring display3
00.00
～
99.99
27.06
☆
P21.07
Monitoring display4
00.00
～
99.99
27.05
☆
P21.08
Monitoring display5
00.00
～
99.99
27.03
☆
P21.09
Monitoring display6
00.00
～
99.99
27.08
☆
P21.10
Monitoring display7
00.00
～
99.99
06.00
☆
P21.11
Running status Monitoring
display parameter option
Unit’digit to Thousand’digit set 1-4 monitor
parameter
0 means no display
，
1
～
7 corresponds to monitor
parameter 1
～
7
Unit’digit
：
choose first monitoring data
，
0
～
7
Ten’s digit
：
choose second monitoring data
，
0
～
7
Hundred’s digit
：
choose third monitoring data
，
0
～
7
Thousand’s digit
：
choose fourth monitoring
display
，
0
～
7
5321
☆
P21.22
Stop status Monitoring
display parameter option
Same as P21.11
0052
☆
ICON500 digital keyboard monitoring interface supports up to 4 monitoring volume. Monitoring variables
in running status and monitoring variables in stop status are set by P21.11 and P21.12, respectively. Press
【
SHIFT
】
key on the keyboard to switch the monitoring volume from low to high of P21.11 or P21.12,
Encountered "0" then skip, cycle monitoring.
Take the shutdown monitoring interface for example, P21.12 = 0052, there are 2 monitoring variables, which are
r27.01 (monitor display parameter 2, P21.05 = 27.01) and r27.03 (monitor display parameter 5, P21.08 = 27.03),
press the
【
SHIFT
】
key on the keyboard to switch between the two monitors, as shown below.
Example of monitoring
interface (stop)
P21.12 = 0052
★
skip when
meet 0
To monitor
Monitor display
Monitor display
display parameter
parameter 2
parameter 5
2
The rules for running the monitoring interface are the same as the shutdown monitoring interface, and will
not be repeated
