Icom IP1000C Скачать руководство пользователя страница 230

Страница: 230 / 246

MAINTENANCE

5-6

4. How to update the firmware

There are two ways to update the firmware.

A: Updating on the setting screen.

Update the firmware on the setting screen.

B: Use the Firmware Update function. (p. 5-8)

The firmware can be automatically downloaded and updated.

You can update the firmware using a USB flash drive. (p. 5-15)

When [MSG] lights green, a firmware update is ready. See the “Precautions” leaflet for details.

■

About the Firmware

The firmware may be updated to improve the functions and specifications of the IP1000C.

Ask your dealer for updated function or specification details.

Version number

NOTE:

•NEVER turn OFF the power until the updating has been completed. Otherwise, the IP1000C may be damaged.

•

If the firewall is running, stop it before updating the firmware. If you want to stop the firewall, ask your network

administrator for the detail.

•

Icom is not responsible on the consequence of the updating the firmware.

Содержание IP1000C























































































































































































































































Результаты поиска

Содержание IP1000C

Отзывы:

Icom IP1000C, Инструкция по эксплуатации, Страница: 230 / 246

Результаты поиска

Содержание IP1000C

Отзывы: