4
ABOUT THE SETTING SCREEN
4-40
8. [Transceiver Settings] Menu
[Transceiver Settings]–[Transceiver Settings]
■
Transceiver Settings [IP100H]
7
Use ID List �������
Select whether or not the IP100H uses the ID list.
(Default: Disable)
•
Disable
The call type is fixed to that which is selected in the “Call Type” item,
as below, even if you push the [ ] key on the IP100H.
L
If you set the Call Type to “Individual” or “Group,” enter the destination ID
(00001 ~ 60000) in the “Destination ID” item.
(Default: All)
L
Even if “Disable” is selected, the IP100H displays a received ID in the ID
list.
•
Enable
The call type is changed by pushing the [ ] key on the IP100H.
Select Default Destination ID from All or an ID number (1 to 50) that is
displayed when the IP100H is turned ON, and the Call type.
L
The ID list is selected on the Common Setting screen.
8
Add All Call to ID List ��
Select whether or not to display All Call in the ID list of the IP100H.
(Default: Disable)
•
Disable
Does not display “All” in the ID list.
L
When “Disable” is selected in the [Add All Call to ID List] item, you cannot
select an All call using the [
] key.
•
Enable
L
When the “Use ID List” item (
7
) is set to “Enable,” set the “Add All Call to
ID List” and the “Default Talkgroup” items.
(Address) key
6
7
8
9
10
11
(This is only an example.)