4
ABOUT THE SETTING SCREEN
4-93
8. [Transceiver Settings] Menu
[Transceiver Settings]–[Transceiver Settings]
■
Transceiver Settings [IP110H]
Emergency: Enable
Emergency: Enable
Emergency: Enable
55
Emergency �������
Select whether or not to use the emergency function. (Default: Disable)
This function is usable only when the emergency function is assigned to
a programmable key. (p. 4-81)
Holding down the programmable key that the emergency function is
assigned to until “Emergency” is displayed turns ON the Emergency
function, and sends an emergency call to the previously set User ID.
The emergency call is canceled when an RX code is received, or by
holding down the programmable key for set period of time in “Emer SW
OFF Timer” (See below).
•The time of period for which the key must be held to turn the
emergency function ON or OFF is set in [Emer SW ON Timer] or
[Emer SW OFF Timer].
56
Emer SW ON Timer ���
Enter the time period for which the programmable key must be held to
turn the emergency function ON.
(Default: 5 seconds)
57
Emer SW OFF Timer ���
Select whether or not to cancel the emergency call by pushing the
programmable key.
(Default: Disable)
When “Enable” is selected, enter the time period for which the
programmable key must be held to turn OFF the emergency function,
between 1 to 10.
(Default: 2 seconds)
58
Emergency Alert Tone ��
Select whether or not to sound an alarm when the emergency call is
sent.
When this item is set to “Disable,” IP110H sends the emergency call
silently, without any alert on itself.
(Default: Enable)
When “Enable” is selected, set the Volume (audio level) of the alarm to
between 0 and 32.
(Default: 32)
55
56
57
58
59
60
61
62
(This is only an example.)