4
ABOUT THE SETTING SCREEN
4-34
8. [Transceiver Settings] Menu
[Transceiver Settings]–[Transceiver Registration]
■
Transceiver Settings
Registers or edits the WLAN transceiver or IP100FS settings.
L
After the setting is completed, you must reboot the WLAN transceiver.
1
TRX No. ��������
Selects the number that the WLAN transceiver or IP100FS is registered
to.
Up to 100 terminals can be registered.
L
Depending on the IP1000C versions, up to 20 terminals can be registered.
2
Transceiver Model ����
Select a WLAN transceiver model.
(Default: IP100H)
3
Name ����������
Enter the transceiver name. (Up to 31 characters)
4
Unit ID ���������
Enter the Individual number (00001 ~ 60000).
(Default: 00001)
5
Password ��������
Enter the password to access to the IP1000C.
(Default: iptrx)
L
Up to 12 characters, lower or upper letters, numbers, symbols can be used.
6
Transceiver Port Number
Enter the port number that the WLAN transceiver uses to communicate
with The IP1000C. (UDP port)
Information
L
•The set port number (RTP) and the port 1 (RTCP) are used for the
communication.
•We recommend to use default port number, if it is not problem.
•The default number differs, depending on the [TRX No.] as shown below.
(Default: TRX No. 1 (30000), TRX No. 2 (30002), TRX No. 3 (30004),
TRX No. 4 (30006), .............................., TRX No. 100 (30198))
•Setting range: Even numbers between 2 and 59998.
(Some numbers may not be acceptable.)
•Do not set the port number which has already been used by another
connection setting.
•When the “Transceiver Model” item (
2
) is set to “IP100FS,” this item is not
displayed.
1
2
3
4
5
6
7
8
9
10
(This is only an example.)