Icom IP1000C Скачать руководство пользователя страница 224

Страница: 224 / 246

ABOUT THE SETTING SCREEN

4-171

11. [Management] Menu

[Management]–[Transceiver Firmware Update]

■

Transceiver Firmware Status

Displays the built-in firmware for the WLAN transceiver. The model name and the version of the firmware are

listed.

■

Online Update

Downloads the built-in firmware for the WLAN transceivers through the Internet, and updates it.

Note: To use this function, an Internet connection, DNS and default gateway settings are necessary.

Transceiver Model ��

Select the model name that you want to update the firmware.

As of June 2023, only the IP110H is selectable.

Check for Updates ��

Click <Check> to connect to the update management server.

When the IP1000C has successfully connected, the latest firmware

status is displayed.

About the firmware information

•

When there is no firmware update, “Firmware already up-to-date” is

displayed.

•

When there is a new firmware update available, the <Update

Firmware> button is displayed.

If an error message is displayed, confirm that the default gateway and DNS

server address are properly set. (Network Settings > IP Address)

Ask your network administrator if a web transmission from the IP1000C is

blocked.

CAUTION:

•

DO NOT

turn off the IP1000C while updating the firmware. Otherwise the IP1000C and the transceivers

may be damaged.

•

Ask your dealer for updated function or specification details.

Содержание IP1000C























































































































































































































































Результаты поиска

Содержание IP1000C

Отзывы:

Icom IP1000C, Инструкция по эксплуатации, Страница: 224 / 246

Результаты поиска

Содержание IP1000C

Отзывы: