4
ABOUT THE SETTING SCREEN
4-41
8. [Transceiver Settings] Menu
[Transceiver Settings]–[Transceiver Settings]
■
Transceiver Settings [IP100H]
9
Default Talkgroup ����
Select a talkgroup if you want to set the IP100H to join a talkgroup
when you turn ON the power.
(Default: Disable)
•
Disable
The IP100 starts up without joining any talkgroup. The ID that is set in
the “Default Destination ID” in the “Use ID List” item is displayed when
the IP100H is turned ON.
•
Enable
The IP100 joins the selected talkgroup when it is turned ON.
L
When the “Use ID List” item is set to “Disable,” this item is not displayed.
10
Volume ���������
Set the beep level when the IP100H receives a Call or message to
between 0 and 32.
(Default: 10)
L
When this setting set to “0,” the notification beep becomes OFF.
L
The notification beep is individually set for the Call type or message in the
“Receive Notification Tone” item on the [Common Settings] screen.
11
Ringer and Vibration ���
Set the action when the IP100H receives a Call or message to between
“Notification Beep,” “Vibration” and “Notification Beep + Vibration.”
(Default: Notification Beep)
•
Notification Beep
When the IP100H receives a Call or message, the specified
Notification beep sounds depending on the Call or message.
The notification beep is set in the “Receive Notification Tone” item on
the [Common Settings] screen.
•
Vibration
When the IP100H receives a Call or message, it vibrates for
notification.
•
Notification Beep + Vibration
When the IP100H receives a Call or message, the Notification beep
sounds and it vibrates for notification.
6
7
8
9
10
11
(This is only an example.)