4
ABOUT THE SETTING SCREEN
4-38
8. [Transceiver Settings] Menu
[Transceiver Settings]–[Transceiver Settings]
■
Transceiver Settings [IP100H]
Individually assign the functions or set the receive notification tone to the registered IP100H.
L
After the setting is completed, you must reboot the IP100H.
1
Unit ID ���������
Select the Individual number (Name) that the IP100H is edited.
L
Only the individual numbers for the WLAN transceivers are selectable.
The individual number that the “Transceiver Model” item on the [Transceiver
Registration] screen is set to “IP100FS,” cannot be selected.
2
Display Item ������
Select whether the IP100H displays the Date and Time or its Name in
the standby mode.
(Default: Date and Time)
L
If the “Name” item on the [Transceiver Registration] screen has not been
entered, and this setting is set to “Name,” the IP100H displays the individual
number.
3
Back Light �������
Select the IP100H backlight function.
(Default: Auto)
•
OFF
The backlight does not light.
•
ON
The backlight lights continuously.
•
Auto
The backlight lights when an operation is performed, and goes out
after 5 seconds.
4
TX Inhibit ��������
Select “Enable” to inhibit the IP100H’s transmission. (Default: Disable)
L
When this setting is set to “Enable,” the IP100H cannot also transmit with an
optional microphone or using VOX function as well.
5
PTT Lock ��������
Select “Enable” to lock the IP100H’s PTT switch.
(Default: Disable)
L
When this setting is set to “Enable,” the IP100H cannot transmit by holding
its PTT switch, but it can be transmitted with an optional microphone or using
VOX function as well.
1
2
3
4
5
(This is only an example.)