2
SETTING UP THE IP1000C SYSTEM
2-12
2. Transceiver settings
■
About the status settings
Enter the status that the WLAN transceiver will transmit.
After registration is finished, the WLAN transceiver needs to be rebooted.
When using the Status, set the “Status” to “Enable.” (p.4-46)
Click [Common Settings], then [Status].
•The [Status] screen is displayed.
1
Enter a status of up to 32 characters in the “Status Setting” field. Then click <Apply>.
L
Up to 10 statuses can be entered.
L
The items that are unchecked are not displayed on the WLAN transceiver.
2
q
Enter
w
Click