4
ABOUT THE SETTING SCREEN
4-52
8. [Transceiver Settings] Menu
[Transceiver Settings]–[Transceiver Settings]
■
Transceiver Settings [IP100H]
20
Option Key ………………… •
Emergency
Hold down [Option] key until “Emergency” is displayed to send an
emergency call.
When the emergency call is sent, an alarm sounds. The emergency
call is canceled and the alarm stops when the transceiver receives a
response or [Option] key of the transceiver is held down.
L
The time of period for which the key must be held down to turn the
emergency function ON or OFF is set in the [Emer SW ON Timer] item (
35
)
or [Emer SW OFF Timer] item (
36
).
21
Clear Down during Telephone Call
Select “Enable,” if you want to terminate the phone call by pushing the
IP100H’s [Option] key.
(Default: Enable)
L
When “Clear Down” is selected on the [Option Key] item (
20
), this item is not
displayed.
Push
Before the target telephone is picked up, or
during phone call, pushing [Option] terminates
the phone call.
L
The IP100H can terminate the phone call, when a
telephone calls the IP100H individually, or when the
IP100H calls a telephone.
19
20
21
22
23
(This is only an example.)
NOTE:
The IP1000C should not be used when high reliability is necessary.
The communication cannot be made, depending on the environment around the IP1000C, such as the
consumption of a battery, the signal environment, or the access point or network status.
Use the [Emergency] and [Lone Worker] functions as a supplementary function.