Icom IP1000C Скачать руководство пользователя страница 231

Страница: 231 / 246

MAINTENANCE

5-7

4. How to update the firmware

A: Update the firmware on the setting screen

We recommend that you save the current settings in the PC before updating the firmware. (p. 5-12)

Note: Some settings may be returned to their default after the firmware update. Check the Icom website for

details.

Restricting access to the setting screen is recommended. (p. 3-2)

NOTE:

•NEVER turn OFF the power until the updating has been completed. Otherwise, the IP1000C may be damaged.

•

The IP1000C’s IP address is set to “192.168.0.1,” when initialized by the firmware update. Set the PC’s IP address to

“192.168.0.xxx.” (You can set xxx to any number from 2 to 254.)

Download a new firmware (extension: “dat”) from the Icom website.

Click the [Management] menu, then [Firmware Update].

• The [Firmware Update] screen appears.

Click <Choose File>, select the new firmware file, and then click <OK>.

Click

Click <Update>.

•

The “Now updating firmware” screen appears.

Click

Содержание IP1000C























































































































































































































































Результаты поиска

Содержание IP1000C

Отзывы:

Icom IP1000C, Инструкция по эксплуатации, Страница: 231 / 246

Результаты поиска

Содержание IP1000C

Отзывы: