4
ABOUT THE SETTING SCREEN
4-100
8. [Transceiver Settings] Menu
[Transceiver Settings]–[Transceiver Settings]
■
Transceiver Settings [IP110H]
72
With Stationary �����
Select whether or not to use the Lone Worker function with the
Stationary function option.
(Default: Disable)
If this item is set to “Enable,” Reminder Timer is started when:
•No operation occurs for Lone Worker’s ON Timer period.
AND
•The user is detected as stationary for the Lone Worker’s ON Timer
period.
After the Reminder Timer period ends, the emergency call is
transmitted.
L
The stationary status is detected by Stationary Sensitivity.
L
When the transceiver is operated, or when the user moves the transceiver
during the Reminder Timer period, Lone Worker’s ON Timer and Reminder
Timer are reset.
Example:
ON Timer: 60 minutes
Reminder Timer: 60 seconds
60 min.
60 sec.
Stationary
Sensitivity
Operation
Acceleration
Time
ON Timer
Reminder
Timer
Emergency
call
Reminder beep
sounds.
The Emergency
function turns ON.
[PTT]
[PTT]
[PTT]
Stationary is
detected.
No operation
is detected.
63
64
65
66
67
68
69
70
71
72
(This is only an example.)