4
ABOUT THE SETTING SCREEN
4-57
8. [Transceiver Settings] Menu
[Transceiver Settings]–[Transceiver Settings]
■
Transceiver Settings [IP100H]
33
Emergency �������
Select whether or not to use the emergency function. (Default: Disable)
Holding down the [Option] or [Log] key until “Emergency” is displayed
turns ON the Emergency function, and sends an emergency call to the
previously set User ID.
The emergency call is canceled when an RX code is received, or
holding down the [Option] or the [Log] key for set period of time in
“Emer SW OFF Timer” (
36
).
• The time of period for which the key must be held to turn the
emergency function ON or OFF is set in [Emer SW ON Timer] item (
35
)
or [Emer SW OFF Timer] item (
36
).
34
Assign Emergency to
Log Key (long press) ��
Select whether to use the [ ] key to send an emergency call or not.
(Default: Enable)
35
Emer SW ON Timer ���
Enter the time period for which [Option] or [Log] must be held to turn
the emergency function ON.
(Default: 5 seconds)
36
Emer SW OFF Timer ���
Select whether or not to cancel the emergency call by pushing [Option]
or [Log].
(Default: Disable)
When “Enable” is selected, enter the time period for which [Option] or
[Log] must be pushed and held to turn OFF the emergency function,
between 1 to 10.
(Default: 2 seconds)
37
Emergency Alert Tone ��
Select whether or not to sound an alarm when the emergency call is
sent.
When this item is set to “Disable,” IP100H sends the emergency call
silently, without any alert on itself.
(Default: Enable)
When “Enable” is selected, set the Volume (audio level) of the alarm to
between 0 and 32.
(Default: 32)
Emergency: Enable
Emergency: Enable
Emergency: Enable
Emergency: Enable
33
34
35
36
37
38
39
40
41
(This is only an example.)