4
ABOUT THE SETTING SCREEN
4-67
8. [Transceiver Settings] Menu
[Transceiver Settings]–[Transceiver Settings]
■
Transceiver Settings [IP110H]
Individually assign the functions or set the receive notification tone to the registered IP110H.
L
After the setting is completed, you must reboot the IP110H.
1
Unit ID ���������
Select the Individual number (Name) of IP110H to be edited.
L
Only the individual numbers for the WLAN transceiver are selectable.
The individual number that the “Transceiver Model” item on the [Transceiver
Registration] screen is set to “IP100FS,” cannot be selected.
2
Display Item ������
Select whether the IP110H displays the Date and Time or its Name in
the standby mode.
(Default: Date and Time)
L
If the “Name” item on the [Transceiver Registration] screen has not been
entered, and this setting is set to “Name,” the IP110H displays the individual
number.
3
Back Light �������
Select the screen backlight function.
(Default: Auto)
•
OFF
The backlight does not light.
•
ON
The backlight lights continuously.
•
Auto
The backlight lights when an operation is performed, and goes out
after 5 seconds.
4
Back Light Brightness ��
Select the screen backlight brightness from Dark and Bright.
(Default: Bright)
5
Contrast ��������
Set the screen contrast to between 1 (the lowest) and 16 (the highest.)
(Default: 8)
6
Name for All Call ����
Enter a name for All call of up to 5 characters, if necessary.
7
Startup Comment ����
Enter a comment of up to 8 characters. The comment is displayed
when the IP110H boots up.
1
2
3
4
5
6
7
(This is only an example.)