Icom IP1000C Скачать руководство пользователя страница 57

Страница: 57 / 246

ABOUT THE SETTING SCREEN

4-4

1. About the setting screen

Icom website link

Setting menu

Setting screen

Setting buttons

Icom website link

Click the Icom logo to open the Icom website, if your PC

is connected to the Internet.

Setting menu

Displays the screen name list on the menu line. When

you click the menu line that “



” is displayed at the left of

the title, a list of screen names drops down. Then, you

can click to select the desired screen name.

If you click “TOP,” all screen names are displayed or

hided.

Setting screen

Displays the settings and values when you click the

screen name.

Setting buttons

Save or cancel setting values.

If “A reboot is required to apply all the new settings.” is

displayed on the screen when you click the [Apply] button,

click the [OK] button.

The IP1000C reboots, and the setting items and values

are updated.

The following message is displayed on the screen while

the IP1000C is rebooting.

Now rebooting.

Wait XX seconds for startup.

If this page doesn’t automatically refresh after rebooting, click [Back].

If the setting screen does not automatically return, click

[Back] after XX seconds have passed from the “Now

rebooting.” message appears.

Items and buttons may differ, depending on the

settings.

Содержание IP1000C























































































































































































































































Результаты поиска

Содержание IP1000C

Отзывы:

Icom IP1000C, Инструкция по эксплуатации, Страница: 57 / 246

Результаты поиска

Содержание IP1000C

Отзывы: