![ICEMASTER PANDA 6000ND Скачать руководство пользователя страница 16](http://html1.mh-extra.com/html/icemaster/panda-6000nd/panda-6000nd_manual_3408660016.webp)
Seite 16 PANDA 06 - 75 Fahrzeug 230V/50Hz 120V/60Hz Betriebsanleitung/Operation manual
...\Handbuch\Fahrzeug\2-spaltig\Panda16\MPL\P15v1v04.p65
02´02
Made by ICEMASTER GmbH - Germany
2.3
General Operating Instructions
2.3.1 Routine "Pre-Start" Checks (daily)
1.
Check engine oil level
LOW OIL PRESSURE WARNING LIGHT!
The generator switches off in the case of insufficient oil-pressure.
Do not run the generator with the oil at the lowest level in the crank-
case. (A smaller volume of oil will become contaminated consider-
ably quicker than a larger volume and there is the possibility that small
air bubbles will get in the oil)
Therefore daily oil-checks are required. The oil-level should
always be refilled to MAX. Check oil level prior to starting motor or
at least 5 minutes after the motor has stopped.
Motor oil SAE20 or 10W30 for normal temperatures.
2.
Check cooling water level.
3.
Check all hoses and hose connections for leaks.
4.
Check all cables and cable end terminal connections.
5.
Check tightness of all retaining and connection bolts on the engine
& generator and generator base mount bolts.
6.
Switch "Main Power Source Selector Switch" to "0" when no
electrical devices are in use (i.e. when left for longer periods).
7.
Check that engine temperature and oil pressure indicators are
functioning properly.
In order to test the monitoring functions a cable end is removed from
one of the control switches. The generator then switches off auto-
matically.
Please note and follow the recommended service intervals (refer to
check lists in the appendix).
Kubota
Kubota
Kubota
Kubota
Kubota
Kubota
Kubota
Kubota
Yanmar
VW-Audi
Kubota
Yanmar
VW-Audi
Mercedes
Yanmar
Mercedes
Mercedes
VM
Motorölmengen / Oil-Quantities
Generatortyp
Type of generator
50Hz
Motorfabrikat
Type of engine
2,1 ltr
2,1 ltr
3,3 ltr
4,0 ltr
5,1 ltr
6,0 ltr
6,7 ltr
9,5 ltr
7,0 ltr
4,5 ltr
12,0 ltr
7,0 ltr
4,5 ltr
7,0 ltr
7,0 ltr
7,5 ltr
7,5 ltr
*)
Ölmenge
Oil-Quantities
Kubota
Kubota
Kubota
Kubota
Kubota
Kubota
Kubota
VW-Audi
Yanmar
Yanmar
Yanmar
Generatortyp
Type of generator
60Hz
Motorfabrikat
Type of engine
PANDA 06
PANDA 08 "mini"
PANDA 10
PANDA 12 "mini"
PANDA 14
PANDA 16
PANDA 21
PANDA 30
PANDA 30
PANDA 40
PANDA 50
2,1 ltr
2,1 ltr
3,3 ltr
3,3 ltr
5,1 ltr
5,1 ltr
6,0 ltr
4,5 ltr
7,0 ltr
7,0 ltr
7,0 ltr
Ölmenge
Oil-Quantities
K06PMPNT050
*) Bitte die Daten den unterlagen des Motor-Herstellers entnehmen!
*) Please see missed data in the manual of the engine manufacturer!
Motorölmengen / Oil-Quantities
Z482
Z482
D722
D782
D1105
V1505
V1505TD
V2203
4JH2TE
1,9 D-ADG
F2803
4JH2HTE
1,9 TD-ADE
OM 601
4JH2DTE
OM 602
OM 603
HR 694HT
Z482
Z482
D722
D722
D905
D1005
V1305
1,9 D
4JH2TE
4JH2HTE
4JH2DTE
2.3
Allgemeine Hinweise zum Betrieb des
Generators
2.3.1 Kontrolltätigkeiten vor dem Start (täglich)
1. Ölstandkontrolle
ACHTUNG! ÖLDRUCKÜBERWACHUNG!
Der Dieselmotor schaltet sich bei Öldruckmangel ab. Es ist aber
sehr nachteilig für den Motor, wenn er in der unteren Grenze des
Ölstandes betrieben wird. (Das Öl verunreinigt sich wegen der
geringen Ölmenge und es besteht die Möglichkeit, daß bei dem nie-
drigen Ölstand kleinste Luftblasen mit angesaugt werden.)
Deshalb muß täglich eine Ölkontrolle durchgeführt werden. Dabei
soll das Öl jeweils bis zum Maximumstand aufgefüllt werden.
Überprüfen Sie den Motorölstand, bevor Sie den Motor anlassen
oder frühestens 5 Minuten, nachdem der Motor abgestellt wurde.
Motoröl SAE20 oder 10W30 bei normalen Temperaturbedingungen.
2. Kontrolle Kühlwasserstand.
3. Alle Schlauchverbindungen und Schlauchschellen auf Dichtig-
keit prüfen.
4. Alle Klemmkontakte der elektrischen Leitungen kontrollieren. (Fen-
ster Kontakt)
5. Alle Befestigungsschrauben an Motor und Generator auf fe-
sten Sitz prüfen.
6. Wahlschalter "Landstrom/Generator" vor dem Start auf "0" stellen
oder alle Verbraucher ausschalten.
7. Die Funktion der automatischen Überwachung für Temperatur-
und Öldruck kontrollieren.
Der Test der Überwachungsfunktion erfolgt, indem ein Kabelende
von einem der Überwachungsschalter abgezogen wird. Dann muß
der Generator automatisch abschalten.
Bitte beachten Sie die vorgeschriebenen Wartungsintervalle (siehe
Checkliste im Anhang).
PANDA 6000ND
PANDA 8000NE
PANDA 09ND/12NE
PANDA 14000NE
PANDA 18NE
PANDA 24NE
PANDA 30NE
PANDA 32
PANDA 32
PANDA 35
PANDA 42
PANDA 50
PANDA 47
PANDA 50
PANDA 65
PANDA 60
PANDA 75
PANDA 75