IBM 8645 - Eserver xSeries 220, Руководство по техническому обслуживанию аппаратной части

Страница: 89 / 168

1. Read “System reliability considerations” on page 56 and the documentation that
comes with your options.
2.
Be sure the server and all attached devices are turned off.
3. Follow the instructions that come with the option to prepare it for installation
and to connect it to the server.
Note: If you are attaching a SCSI device, see “SCSI port” on page 87 for SCSI
ID and cabling information.
I/O connector locations
The following illustration shows the input/output connectors (ports) and the
expansion slots on the system board. For pin assignments and other details about
these connectors, see “Input/Output ports”.
Keyboard/mouse
USB
Serial A
Parallel
Serial B
Ethernet
Video
Input/Output ports
This section provides information about the input/output (I/O) ports on the
server. These ports include the following:
v
One parallel port
v
One video port
v
One keyboard port
v
One auxiliary pointing-device (mouse) port
v
Two serial ports
v
Two Universal Serial Bus (USB) ports
v
One Ethernet port
v
One communication connector dedicated to the system management adapter
Notes:
1.
You can set an administrator password through the Configuration/Setup Utility
program only if the optional system management adapter is installed in the
server.
2. The Devices and I/O Ports choice appears only on the full Configuration/Setup
Utility menu. If you have set both levels of passwords (user and administrator),
you must type the administrator password to access the full
Configuration/Setup Utility menu.
Installing options
81