IBM 8645 - Eserver xSeries 220, Руководство по техническому обслуживанию аппаратной части

Страница: 53 / 168

Note: Ensure that the tabs on the back of the cover fit into the slots on the
back of the system. Be sure that the front edge of the cover is flat
against the system.
11. Turn the system back to the tower-orientation; then, remove the top handle.
a. Carefully use a flat-blade screwdriver to push in the tabs inside the plastic
cover on the top of the system; then, remove the plastic cover and store it
for possible future use.
b. Grasp the metal handle and slide it backwards until you can lift it away
from the system. Store the metal handle for possible future use.
Figure 7. Installing the top cover
Figure 8. Removing the plastic cover from the handle
Figure 9. Removing the top handle
Tower-to-rack conversion
45