IBM 8645 - Eserver xSeries 220, Руководство по техническому обслуживанию аппаратной части

Страница: 22 / 168

date is the date that the diagnostic test was run and the error recorded.
cc is the check digit that is used to verify the validity of the
information.
text message is the diagnostic message that indicates the reason for the problem.
Text messages
The diagnostic text message format is as follows:
Function Name: Result (test specific string)
where:
Function Name
is the name of the function being tested when the error occurred.
This corresponds to the function code (fff) given in the previous
list.
Result can be one of the following:
Passed
This result occurs when the diagnostic test completes
without any errors.
Failed This result occurs when the diagnostic test discovers an
error.
User Aborted
This result occurs when you stop the diagnostic test before
it is complete.
Not Applicable
This result occurs when you specify a diagnostic test for a
device that is not present.
Aborted
This result occurs when the test could not proceed because
of the system configuration.
Warning
This result occurs when a possible problem is reported
during the diagnostic test, such as when a device that is to
be tested is not installed.
Test Specific String
This is additional information that you can use to analyze the
problem.
Starting the diagnostic programs
You can press F1 while running the diagnostic programs to obtain
Help
information. You also can press F1 from within a help screen to obtain online
documentation from which you can select different categories. To exit
Help
and
return to where you left off, press Esc.
To start the diagnostic programs:
1.
Turn on the server and watch the screen.
2. When the message
F2 for Diagnostics
appears, press F2.
3.
Type in the appropriate password; then, press Enter.
4. Select either Extended or Basic from the top of the screen.
14
Hardware Maintenance Manual: xSeries 220 Type 8645