IBM 8645 - Eserver xSeries 220, Руководство по техническому обслуживанию аппаратной части

Страница: 125 / 168

Error Code/Symptom FRU/Action
Other numbers Follow instructions on screen.
Processor board LEDs
Table 18.
LED Cause
Fan
1. Replace the fan assembly indicated by lit LED.
Memory
1. Replace the DIMM indicated by the lit DIMM error.
CPU
1.
Turn off the server, reseat the microprocessor, and restart the
server.
2. Replace the microprocessor.
VRM
1. Turn off the server, reseat the VRM indicated by the lit VRM
error LED, and restart the server.
2. Replace the VRM
ServeRAID
For ServeRAID error codes and procedures, refer to the Hardware Maintenance
Manual for the particular RAID adapter in the system being serviced.
Undetermined problems
You are here because the diagnostic tests did not identify the failure, the Devices
List is incorrect, or the system is inoperative.
Note: A corrupt CMOS can cause undetermined problems.
If power problems are suspected:
1. Power-off the computer.
2. Be sure the system is cabled correctly.
3. Remove or disconnect the following (one at a time) until you find the failure
(power-on the computer and reconfigure each time).
v
Any external devices
v
Surge suppressor device (on the computer)
v
Modem, printer, mouse, or non-IBM devices
v
Each adapter
v
Drives
v
Memory Modules (Minimum requirement = one 128 MB DIMM)
Note: Minimum operating requirements are:
a.
1 Power Supply
b. System Board
c. 1 Microprocessor
d. 1 Terminator Card in Slot 2
e. 1 Memory Module (minimum of 1 DIMM in slot labeled DIMM 1)
4. Power-on the computer. If the problem remains, suspect the following FRUs in
the order listed:
Power Supply
System Board
Symptom-to-FRU index
117