IBM 8645 - Eserver xSeries 220, Руководство по техническому обслуживанию аппаратной части

Страница: 124 / 168

Error Code/Symptom FRU/Action
00180300 (No more memory
(above 1MB for PCI adapter)
1. Run Configuration/Setup
2. Failing Adapter
3.
System Board
00180400
(No more memory
(below 1MB for PCI adapter)
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
00180500 (PCI option ROM
checksum error)
1. Remove Failing PCI Card
2. System Board
00180600 (PCI device built-in
self test failure)
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
00180700 ( xxxxyyyy planar
PCI device not responding
(where
xxxx is PCI vendor ID
and yyyy is PCI device ID)
1. System Board
2. PCI Card
00180800 (Unsupported PCI
device installed)
1.
System Board
2. PCI Card
00181000 (PCI error)
1. System Board
2. PCI Card
01295085 (ECC checking
hardware test error)
1. System Board
2. Microprocessor
01298001 (No update data for
microprocessor 1)
1. Ensure all microprocessors are the same stepping level and cache size.
2.
Microprocessor 1
01298002 (No update data for
microprocessor 2)
1. Ensure all microprocessors are the same stepping level and cache size.
2. Microprocessor 2
01298101 (Bad update data
for microprocessor 1)
1. Ensure all microprocessors are the same stepping level and cache size.
2. Microprocessor 1
01298102 (Bad update data
for microprocessor 2)
1. Ensure all microprocessors are the same stepping level and cache size.
2. Microprocessor 2
01298200 (Microprocessor
speed mismatch)
1. Ensure all microprocessors are the same speed.
I9990301 (Fixed boot sector
error)
1. Hard Disk Drive
2.
If RAID system, refer to the Hardware Maintenance Manual for the specific
RAID adapter.
3. SCSI Backplane
4. Cable
5. System Board
I9990305 (Fixed boot sector
error, no operating system
installed)
1. Install operating system to hard disk drive.
I9990650 (AC power has been
restored)
1. Check cable
2. Check for interruption of power supply
3. Power Cable
116
Hardware Maintenance Manual: xSeries 220 Type 8645