IBM 8645 - Eserver xSeries 220, Руководство по техническому обслуживанию аппаратной части

Страница: 111 / 168

Handle assembly
Before you begin:
v
Read “Safety information” on page 123.
v
Review the information in “System reliability considerations” on page 56.
To remove the handle cap, do the following:
1. Power-off the server, if it is on.
2. Unplug the server.
3. Use a flathead screwdriver to gently press in and down on the tabs located on
the interior side wall of the handle.
4. Lift up on the handle cap to separate it from the handle support.
To remove the handle support, do the following:
1.
Power-off the server, if it is on.
2. Unplug the server.
3.
Firmly grasp the handle support and slide it away from the front bezel.
4. Lift up on the handle support to remove it from the slots in the top of the
chassis.
Adapter retainer
Before you begin:
v
Read “Safety information” on page 123.
v
Review the information in “System reliability considerations” on page 56.
FRU information (service only)
103