HP StorageWorks 2/140 - Director Switch, Руководство по обслуживанию

Страница: 152 / 396

Diagnostics
152 Director 2/140 Service Manual
25
A zone merge failed during ISL initialization. The following list explains the
reason:
■
Failure reason 09—Invalid data caused a zone merge failure.
■
Failure reason 0A—A Cannot Merge condition caused a zone merge failure.
Obtain supplementary error code data for the 150 event code.
1. At the Hardware View, choose Logs > Event Log. The Event Log displays.
2. Examine bytes 12 through 15 of event data that specify the error code. Record
the error code.
Perform the data collection procedure and return the CD to HP for analysis.
Contact the next level of support, and report the 150 event code, the associated
failure reason, and the associated error code. Exit MAP.
26
Is the Embedded Web Server interface operational?
YES NO
↓
Analysis for an Ethernet link, AC power distribution, or CTP card
failure is not described in this MAP. Go to “ MAP 0000: Start MAP ”
on page 45. If this is the second time at this step, contact the next level
of support. Exit MAP.
27
Inspect the Fibre Channel port segmentation reason at the Embedded Web Server
interface.
1. At the View panel, click the Port Properties tab. The View panel (Port
Properties tab) displays.
2. Click the port number (0-127 and 132-143) of the segmented port.
3. Inspect the Segmentation Reason field for the selected port.
Is the Segmentation Reason field blank or does it display an
N/A
message?
NO YES
↓
The director ISL is operational. Exit MAP.
The Segmentation Reason field displays a message. Table 20 lists segmentation
reasons and associated steps that describe fault isolation procedures.