manualshive.com logo in svg

HP ProLiant ML570 Generation 2, Руководство по техническому обслуживанию и ремонту, Страница: 69 / 139

Поделиться
Скачать
HP ProLiant ML570 Generation 2 Скачать руководство пользователя страница 69

Removal and Replacement Procedures 

Reverse steps 1 through 11 to replace the PCI backplane. 

System Tray 

 

 

WARNING:  To reduce the risk of personal injury or damage to the equipment, do not 
use the system tray handle to lift or move the ProLiant ML570 Generation 2 server. 

To remove the system tray: 

1.  Prepare the server for a non-hot-plug procedure. Refer to “Preparing the Server for 

Non-Hot-Plug Procedures” in this chapter. 

2.  Remove the front bezel door (tower model only), and lay the server on its side with the 

access panel facing upward. Refer to “Removing the Front Bezel Door (Tower Model 
Only)” in this chapter. 

3.  Remove the access panel. Refer to “Removing the Access Panel” in this chapter. 

4.  Remove the processor air baffles. Refer to “Processor Air Baffles” in this chapter. 

5.  Remove the memory boards. Refer to “Removing a Memory Board” in this chapter. 

6.  Disconnect cables to all PCI expansion boards. 

7.  Remove any expansion boards from the PCI slots. Refer to “Expansion Boards” in this 

chapter. 

HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide 

2-51

 

Содержание ProLiant ML570 Generation 2












































































































































Отзывы:

Нет отзывов