manualshive.com logo in svg

HP ProLiant ML570 Generation 2, Руководство по техническому обслуживанию и ремонту, Страница: 20 / 139

Поделиться
Скачать
HP ProLiant ML570 Generation 2 Скачать руководство пользователя страница 20

Removal and Replacement Procedures 

Symbols on Equipment 

These symbols may be located on equipment in areas where hazardous conditions may exist.  

 

 

66 kg  

160 lb

 

Any product or assembly marked with these symbols indicates that the 
component exceeds the recommended weight for one individual to handle safely.

WARNING:  To reduce the risk of personal injury or damage to the equipment, 
observe local occupational health and safety requirements and guidelines for 
manual material handling. 

 

Any surface or area of the equipment marked with these symbols indicates the 
presence of a hot surface or a hot component. 

WARNING:  To reduce the risk of injury from a hot component, allow the surface 
to cool before touching it. 

 

Any surface or area of the equipment marked with these symbols indicates the 
presence of electrical shock hazards. The enclosed area contains no 
operator-serviceable parts. 

WARNING:  To reduce the risk of injury from electrical shock hazards, do not 
open this enclosure. 

 

Any RJ-45 receptacle marked with these symbols indicates a network interface 
connection. 

WARNING:  To reduce the risk of electric shock, fire, or damage to the equipment, 
do not plug telephone or telecommunications connectors into this receptacle. 

Rack Warnings and Cautions

 

 

 

 

WARNING:  To reduce the risk of personal injury or damage to the equipment, 
adequately stabilize the rack before extending a component outside the rack. Extend 
only one component at a time. A rack may become unstable if more than one 
component is extended. 

 

 

WARNING:  To reduce the risk of personal injury or damage to the equipment: 

• 

Extend the leveling jacks to the floor. 

• 

Rest the full weight of the rack on the leveling jacks. 

• 

Attach the stabilizers to the rack, if it is a single rack installation. 

• 

Couple the racks together in multiple rack installations. 

 

 

WARNING:  When installing the server in a telco rack, adequately secure the rack frame 
to the building structure at the top and bottom. 

 

2-2

 

HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide 

Содержание ProLiant ML570 Generation 2












































































































































Отзывы:

Нет отзывов