HP ProLiant ML570 Generation 2, Руководство по техническому обслуживанию и ремонту

Страница: 29 / 139

Removal and Replacement Procedures
2. Press the latch adjacent to the system tray release handle to release the system tray (1).
3. Grasp the system tray release handle and pull the tray from the chassis until it stops in the
extended position (2).
NOTE:
If the server is mounted into a rack, the system tray latches can be reached more easily by
extending the server from the rack (approximately the depth of the drives) before sliding the system
tray from the back of the chassis.
Figure 2-8: Opening the system tray
Memory
This section provides the following information about the memory components and
procedures for hot-plug and non-hot-plug removal and replacement of memory in the server.
•
•
•
•
•
•
•
•
Parts of the memory board
Memory board LEDs and icons
DIMM installation requirements
Removing a memory board
Removing a DIMM
Installing a DIMM
Installing a memory board
Configuring the memory
HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide 2-11