manualshive.com logo in svg

HP ProLiant ML570 Generation 2, Руководство по техническому обслуживанию и ремонту, Страница: 56 / 139

Поделиться
Скачать
HP ProLiant ML570 Generation 2 Скачать руководство пользователя страница 56

Removal and Replacement Procedures 

Extending the Server from the Rack 

To extend the server from the rack: 

1.  Loosen the front panel thumbscrews that secure the server to the front of the rack 

(1)

. 

2.  Extend the server until the server rail release latches engage 

(2)

. 

 

Figure 2-26:  Extending the server from the rack 

Removing the Server from the Rack 

 

 

WARNING:  To reduce the risk of personal injury or damage to the equipment, observe 
local occupational health and safety requirements and guidelines for manual material 
handling. 

 

 

WARNING:  Before lifting the server, remove all hot-plug power supplies to reduce 
weight. 

 

 

WARNING

:  

The server is very heavy, up to 66 kg (146 lb). To reduce the risk of 

personal injury or damage to the equipment:

 

• 

Remove all hot-plug power supplies to reduce the weight of the server before 
lifting it. 

• 

Observe local occupational health and safety requirements and guidelines for 
manual material handling. 

• 

Use more than one person to lift and stabilize the server. 

 

2-38

 

HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide 

 

Содержание ProLiant ML570 Generation 2












































































































































Отзывы:

Нет отзывов