Removal and Replacement Procedures
WARNING: To reduce the risk of personal injury or damage to the equipment, use two
or more people to safely unload the rack from the pallet. An empty 42U rack weighs
115 kg (253 lb), is over 2.1 m (7 ft) tall, and may become unstable when moved on its
casters. Handle the rack from both sides as it rolls down the ramp from the pallet. Do
not stand in front of the rack.
CAUTION:
Always begin by mounting the heaviest item on the bottom of the rack. Continue
to populate the rack from the bottom to the top.
Server Warnings and Cautions
WARNING: Do not exceed the level of repair specified in the procedures in the product
documentation. All troubleshooting and repair procedures are detailed to allow only
subassembly or module-level repair. Because of the complexity of the individual
boards and subassemblies, do not attempt to make repairs at the component level or to
make modifications to any printed wiring board. Improper repairs can create a safety
hazard.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the hot-plug
drives and the internal system components to cool before touching.
WARNING: To reduce the risk of electric shock or damage to the equipment:
•
Do not disable the AC power cord grounding plug. The grounding plug is an
important safety feature.
•
Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
•
Unplug the power cord from each power supply to disconnect power to the
equipment.
WARNING: Before lifting the server, remove all hot-plug power supplies and hard
drives to reduce weight.
WARNING: The installation of internal options and routine maintenance and service of
this product should be performed by individuals who are knowledgeable about the
procedures, precautions, and hazards associated with equipment containing
hazardous energy levels.
WARNING: Do not use conductive tools that could bridge live parts. Remove all
watches, rings, or loose jewelry when working in hot-plug areas of an energized server.
WARNING: Do not replace non-hot-pluggable components while power is applied to
the product. First, shut down the product and disconnect all AC power cords.
HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide
2-3
Содержание ProLiant ML570 Generation 2
Страница 6: ......
