Installation and Interfacing
Model 3585A
2-4
OPTION 907
�
.
.-----
-
I.LASTlC TRIM
HANDLE K I T , B E NC H OPERATION
RACK M O U N T F LA N G E K I T
RACK M O U NT F LA N G E / F R O N T H A N D L E K I T
Figure 2·2. Rack Mount and Handle Kits
2· 1 3. Rack Mounting Without Slides
a. Remove the plastic trim (Figure 2-2) and front handles from the 3585A if it is so equip
ped.
b. Remove the plastic feet from the bottom of the 3585A.
c. Install the Rack Flange Kit with or without handles according to the instructions in
cluded in the kit:
Rack Flange Kit (no handles) . . . . . . . . . . Option 908, -hp- Part Number 5061 -()()79
Rack Flange
&
Front Handle Kit . . . . . . . Option 909, -hp- Part Number 5061 -()()85
d. Install an Instrument Support Rail on each side of the instrument rack. (The Instru
ment Support Rails, used to support the weight of the instrument, are included with -hp
rack-mount cabinets.)
WARNING
1. The weight of the 3585A must be supported by Instrument sup
port Rails inside the instrument rack. Do not under any cir
cumstances attempt to rack mount the 3585A using only the front
flanges.
2.
The 3585A is heavy for its size (approximately 88 lbs, 40 kg.).
Use extreme care when lifting it to avoid personal injury.
e. Using
two
people, lift the 3585A to its position in the rack on
top
of the Instrument
Support Rails.
f. Using the appropriate screws, fasten the 3585A's Rack-Mount Flanges to the front of
the instrument rack.
