Honeywell Thor VM3 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 378

Honeywell Thor VM3 Скачать руководство пользователя страница 48

36

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

CANbus / Audio Connector

Power Supply Connector

Standard Dock

Enhanced Dock

The CANbus/Audio connector is a
D-15 male connector located on
the back of the dock.

The connector supports a headset
adapter cable or a CANbus cable.
The Thor VM3 does not support
connecting audio and CANbus
simultaneously.

CANbus / Audio Connector

for

connector pinout detail.

A headset cable attaches to the
CANbus / Audio connector and
provides a quick connect connec-
tion for a headset. See

for more informa-

tion.

The CANbus Y cable has a 9 pin F
SAE J1939 (Deutsch) and 9 pin M
SAE J1939 (Deutsch) connector.
See

Connect CANbus Cable

for

more information.

The CANbus interface is a virtual
COM port. This port can be
accessed using standard Windows
API calls.

Standard Dock

Enhanced Dock

Power is supplied to the Thor VM3 through the
power connector. Additionally this assembly
provides a connection point for the vehicle’s
chassis ground to be connected internally to
the conductive chassis of the computer.

The Thor VM3 internal power supply can
accept DC input voltages in the range of 10 to
60 Volts DC when using the VM1D standard
dock or VM3D enhanced docks. Other docks
have different power requirements. See

for details.

Power Supply Connector

for connector pin-

out detail. See

for more infor-

mation on connecting power to the Thor VM3.

COM1

COM2

USB

CANBUS/AUDIO

«
...
46
47
48
49
50
...
»

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов